LED Tissue Sealing Device
My UTK biomedical engineering capstone, sponsored by a surgeon at UT Medical Center. Our team is designing a handheld, battery-powered, disposable LED device that activates Rose Bengal dye to seal tissue without sutures, as a low-cost alternative to laser systems that cost around $99k.
- Status
- In design, team project (expected May 2027)
- My role
- Internal optical and electrical system
- Targets
- 0.5 W/cm² over 1 cm² at 10 mm, 90 J/cm² dose, ≤ $30 in parts
- Standards
- IEC 62471, ISO 10993, ISO 11135
The problem
Sealing tissue with light and Rose Bengal dye works, but the laser systems that do it cost around $99k. We want a handheld, disposable device that does the same job with LEDs for a small fraction of that.
My part
I'm designing most of the internal optical and electrical system: a 527 nm LED array on a constant-current boost driver running from three AA batteries, with no microcontroller. I set the design targets of 0.5 W/cm² over a 1 cm² spot at 10 mm, a 90 J/cm² dose, and $30 or less in parts.
Requirements
I wrote the Statement of Work for the sponsor proposal, and the sponsor approved our needs assessment. I also built a requirements matrix of 27 requirements and 23 test cases tied to light safety, biocompatibility and sterilization standards.